I'm love love loving my THIS IS THE DAY wooden sign. I feel like it's cheering me on as I get ready for work in the morning.
It was super easy to make, and I'm guessing there's a door in your house that could use a little up top decorating. So here's a quick and dirty tutorial to make your own over-the-door painted wooden sign. (I was inspired by this gorgeous table project from Domestic Imperfection.)
![]()
Materials
1 x 4 wood cut to width of doorway (mine was cedar cut to 2 ft)
White craft paint
Paint brush
Wood stain in color of your choice
Foam brush
Paper towel
Printer
Tape
Paper cutter or scissors
Power sander or sandpaper
Carbon tracing paper
Large sawtooth hanger
Large sawtooth hanger
1. Lightly sand your wood board, either with sandpaper or a power sander. This doesn't need to be perfect. Just remove the rough edges.
2. On your computer, type out the words you want on your sign and choose a font. Increase the size so that the letters are slightly less than 4 inches tall and will fit lengthwise across your board. Because I was trying to save paper and not do a bunch of trial and error printing, I set my page view to 100% and put a ruler right up to the computer screen.
2. On your computer, type out the words you want on your sign and choose a font. Increase the size so that the letters are slightly less than 4 inches tall and will fit lengthwise across your board. Because I was trying to save paper and not do a bunch of trial and error printing, I set my page view to 100% and put a ruler right up to the computer screen.
3. Print out your words and cut off excess paper. Getting your cuts nice and straight at this stage will make things easier in the next step. I used a paper cutter.
4. Tape the words together, leaving appropriate space in between words and then tape the whole phrase down to your board just on the two short sides. Because my paper edges were straight and even, I was able to line them against the edge of the board to make sure the phrase would be straight. Center the phrase by measuring the distance from the short edges.
5. Slide your transfer paper underneath the printed paper taped to your board so that there is a layer of transfer paper between every letter and the wood board. (And please take note of my awesome vintage carbon tracing paper, a gift from my stepmom.)
![]()
6. With a pen or pencil, carefully trace around the edges of all the letters. When you're finished, remove the papers and transfer paper, and you should have transferred an outline of the phrase onto your board.
7. With your white paint and paint brush, fill in the outlines of all your letters. You may need multiple coats. Allow the paint to dry as long as necessary, according to the instructions on the bottle.
8. Once the paint is dry, cover your work surface and brush your stain onto the board with the foam brush. Allowing coats to dry slightly in between applications, brush on stain as many times as necessary to achieve your desired color.
![]()
9. Once the stain has dried, find the middle of the board and attach the sawtooth hanger.
8. Once the paint is dry, cover your work surface and brush your stain onto the board with the foam brush. Allowing coats to dry slightly in between applications, brush on stain as many times as necessary to achieve your desired color.
9. Once the stain has dried, find the middle of the board and attach the sawtooth hanger.
10. Hang in a perfect spot over your door.
Originally published on ktmade.
Katie Taylor